[Ronja] twwister2 not working

[A. B.]

Does nobody have any idea???

 

> Dear all
> 
> i have two twisters2 along with two Tx's and Rx's ... i can see the 1MHz
> signal at the output of the Rx's ... when i connect the UTP to the NIC the
> red LED starts to flicker , on the other twister the green LED start to
> flicker , but the two PC's never get connected , they just keep acquiring an
> IP ... the switches' positions are correct , and the UTP strands are
> connected correctly !!!!.. i noticed a strange thing ... when i put the
> probes of the oscilloscope on the transmitting pair of the UTP the green
> LED on both twisters starts to flicker .
> any explanation !?!?
> another thing ... i configured the interfaces as if they were connected via
> a crossover cable ... i'am not sure this is the correct configuration though
> !!!


 
 		 	   		  
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
https://signup.live.com/signup.aspx?id=60969
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://pointless.net/pipermail/ronja/attachments/20100501/c3872d4f/attachment.html