From bio5 at hotmail.com Sat May 1 21:26:08 2010 From: bio5 at hotmail.com (A. B.) Date: Sat, 1 May 2010 23:26:08 +0300 Subject: [Ronja] twwister2 not working In-Reply-To: References: Message-ID: Does nobody have any idea??? > Dear all > > i have two twisters2 along with two Tx's and Rx's ... i can see the 1MHz > signal at the output of the Rx's ... when i connect the UTP to the NIC the > red LED starts to flicker , on the other twister the green LED start to > flicker , but the two PC's never get connected , they just keep acquiring an > IP ... the switches' positions are correct , and the UTP strands are > connected correctly !!!!.. i noticed a strange thing ... when i put the > probes of the oscilloscope on the transmitting pair of the UTP the green > LED on both twisters starts to flicker . > any explanation !?!? > another thing ... i configured the interfaces as if they were connected via > a crossover cable ... i'am not sure this is the correct configuration though > !!! _________________________________________________________________ Hotmail: Trusted email with powerful SPAM protection. https://signup.live.com/signup.aspx?id=60969 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://pointless.net/pipermail/ronja/attachments/20100501/c3872d4f/attachment.html