[Ronja] twwister2 not working

[mohamad al-jamal]

thanks for the reply , but no , it's not a network issue , it turned out to
be soldering issue .. the thing is working fine now .

On Wed, Jul 21, 2010 at 9:56 AM, Karel Kulhavy <twibright at hispeed.ch> wrote:

> Maybe the network is somehow misconfigured?
>
> Karel
> ---- "A. B." <bio5 at hotmail.com> schrieb:
> >
> > Does nobody have any idea???
> >
> >
> >
> > > Dear all
> > >
> > > i have two twisters2 along with two Tx's and Rx's ... i can see the
> 1MHz
> > > signal at the output of the Rx's ... when i connect the UTP to the NIC
> the
> > > red LED starts to flicker , on the other twister the green LED start to
> > > flicker , but the two PC's never get connected , they just keep
> acquiring an
> > > IP ... the switches' positions are correct , and the UTP strands are
> > > connected correctly !!!!.. i noticed a strange thing ... when i put the
> > > probes of the oscilloscope on the transmitting pair of the UTP the
> green
> > > LED on both twisters starts to flicker .
> > > any explanation !?!?
> > > another thing ... i configured the interfaces as if they were connected
> via
> > > a crossover cable ... i'am not sure this is the correct configuration
> though
> > > !!!
> >
> >
> >
> >
> > _________________________________________________________________
> > Hotmail: Trusted email with powerful SPAM protection.
> > https://signup.live.com/signup.aspx?id=60969
>
>
> _______________________________________________
> Ronja mailing list
> Ronja at lists.pointless.net
> http://pointless.net/mailman/listinfo/ronja
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://pointless.net/pipermail/ronja/attachments/20100721/4d88bce2/attachment.html