[Ronja] Someone already did this? Opinion from Karel is welcome too!

[Karel Kulhavy]

---- Russell Valentine <russ at coldstonelabs.org> schrieb:
> Leandro Alan wrote:
> > Backbone:
> > Multiples Ronja doing a backbone link (star or mesh topology). To increase bandwidth I think is possible to add one or more Ronja to the same link.
> 
> So these spots were you have multiple Ronja to get increase bandwidth, 
> you would have some router to direct data through the two different 
> Ronja? Or just half the users through one, half through the other?

You can use both. Link aggregation or connect the networks separately.
There has to be some distance between the links. How much hard to say because it will tolerate some crosstalk.

Karel
> 
> Using multiple Ronja along the same line might be hard. If they are 
> pointed at the same direction the TX beam divergence would cause 
> interference with the other one I would think. They would need to be 
> apart (up to around 3 meters if you can achieve 2mrad divergence) or 
> something cleaver needs to be done (polarization filters?).
> 
> _______________________________________________
> Ronja mailing list
> Ronja at lists.pointless.net
> http://pointless.net/mailman/listinfo/ronja