[Ronja] nebulus test points don't match

[mohamad al-jamal]

Hi

I've just finished building my nebulus Tx , following the exact instructions
in the guide to the last detail , except for the zener , where i used a 7.3V
instead of 7.5
as i couldn't find one  . but the "DC - no signal" test points didn't  match
, i rechecked the connections , and tested the parts before placing them ,
and afterwords,
but there are differences , 1.3 V for P7 for example !! here are my results
:
P1   1mV
P2    5.55 V
P3    4.88
P4    5.58
P5    9.88
P6    4.21
P7    5.00
P8    0
P9    1mV
any help is highly appreciated
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://pointless.net/pipermail/ronja/attachments/20090801/8e563843/attachment.html