From twibright at hispeed.ch  Thu May 15 18:51:24 2008
From: twibright at hispeed.ch (Karel Kulhavy)
Date: Thu, 15 May 2008 19:51:24 +0200
Subject: [Ronja] OT: Surfing Spain
Message-ID: <12016477.1210873885008.JavaMail.root@viefep17>

Hello

If someone is sporty and interested in surfing I am looking for
someone to go to a beginner surfing course in Spain with.

Cheers,

CL<


From twibright at hispeed.ch  Wed May 21 22:38:23 2008
From: twibright at hispeed.ch (Karel Kulhavy)
Date: Wed, 21 May 2008 23:38:23 +0200
Subject: [Ronja] Patek odpoledne Rueti se Samym grilovani!
Message-ID: <27468011.1211405903504.JavaMail.root@viefep14>

17:53 train S15 Gleis 23/24 Richtung Rapperswil
or the
17:40 train S5 Richtung Pf?ffikon.



From twibright at hispeed.ch  Wed May 21 22:40:29 2008
From: twibright at hispeed.ch (Karel Kulhavy)
Date: Wed, 21 May 2008 23:40:29 +0200
Subject: [Ronja] Patek odpoledne Rueti se Samym grilovani!
Message-ID: <30814780.1211406029395.JavaMail.root@viefep14>

17:53 train S15 Gleis 23/24 Richtung Rapperswil
or the
17:40 train S5 Richtung Pf?ffikon.



From twibright at hispeed.ch  Sat May 24 09:50:57 2008
From: twibright at hispeed.ch (Karel Kulhavy)
Date: Sat, 24 May 2008 10:50:57 +0200
Subject: [Ronja] Sending money through envelope
Message-ID: <30743122.1211619057283.JavaMail.root@viefep11>

Once someone told me that if you put a banknote into an envelope between two sheets of aluminium foil, that it will not be stolen. Now it seems to be logically confirmed.

Here is an article how a thief employee of Czech Post stole international letters and shined them through to see if there is a banknote or jewelry. If you put aluminium foil there no light pases through and he cannot see what's inside. Unfortunately only in Czech:

http://zpravy.idnes.cz/posta-vytipovala-podezrele-z-velke-dopisove-loupeze-p0r-/krimi.asp?c=A080523_220743_krimi_dp

CL<


From twibright at hispeed.ch  Sat May 24 10:03:33 2008
From: twibright at hispeed.ch (Karel Kulhavy)
Date: Sat, 24 May 2008 11:03:33 +0200
Subject: [Ronja] Google Open Source Jam Talk
Message-ID: <30036476.1211619813649.JavaMail.root@viefep11>

I had a talk at Google Open Source Jam in Zurich on 22th May. Here you can see the slides:
http://ronja.twibright.com/about.php
The text is here:
http://ronja.twibright.com/slides/ronja_osj.txt

CL<


From twibright at hispeed.ch  Sun May 25 13:20:42 2008
From: twibright at hispeed.ch (Karel Kulhavy)
Date: Sun, 25 May 2008 14:20:42 +0200
Subject: [Ronja] Open source CRT wall holder
Message-ID: <27869755.1211718042312.JavaMail.root@viefep18>

Do not throw away good large CRT screens just because they don't fit on your desktop!

I have released Twibright Atlas, an open source CRT wall mount:
http://ronja.twibright.com/atlas.php

CL<


From boza2 at volny.cz  Mon May 26 12:55:10 2008
From: boza2 at volny.cz (boza2 at volny.cz)
Date: Mon, 26 May 2008 13:55:10 +0200 (CEST)
Subject: [Ronja] =?iso-8859-2?q?Sending_money_through_envelope?=
In-Reply-To: <30743122.1211619057283.JavaMail.root@viefep11>
References: <30743122.1211619057283.JavaMail.root@viefep11>
Message-ID: <0b34b0a2424eb34994db053fa3aac0e0@www1.mail.volny.cz>

I made this way at least 20 payments from all around the world (USA,
India, Europe...) and every time it was delivered all right.

Ondra

----- P?VODN? ZPR?VA -----
Od: "Karel Kulhavy" <twibright at hispeed.ch>
Komu: "Twibright Ronja" <ronja at lists.pointless.net>
P?edm?t: [Ronja] Sending money through envelope
Datum: 24.5.2008 - 10:50:57

> Once someone told me that if you put a banknote into
> an envelope between two sheets of aluminium foil,
> that it will not be stolen. Now it seems to be logically
> confirmed.
> 
> Here is an article how a thief employee of Czech Post
> stole international letters and shined them through
> to see if there is a banknote or jewelry. If you put
> aluminium foil there no light pases through and he
> cannot see what's inside. Unfortunately only in Czech:
> 
> http://zpravy.idnes.cz/posta-vytipovala-podezrele-z-velke-dopisove-loupeze-p0r-/krimi.asp?c=A080523_220743_krimi_dp
> > 
> CL<
> 
> -- 
> Twibright Ronja mailing list http://ronja.twibright.com
> Ronja at lists.pointless.net
> http://pointless.net/mailman/listinfo/ronja




From antitron at web.de  Mon May 26 14:13:01 2008
From: antitron at web.de (Thomas Egenhofer)
Date: Mon, 26 May 2008 15:13:01 +0200
Subject: [Ronja] LUXEON Rebel LED's?
Message-ID: <1817055445@web.de>

anyone had a look at them yet? (luxeon rebel leds)
they seems to be quite small and thus might be able to produce a quite good beam and have about 1W.
they are also available in a number of different mounts, including the good old luxeon star emitter.
so anyone has tested them yet? switching times,etc?
also intrested in additional lens systems since they emit over 160?
you can get them for ~5 ? here if you buy only one. the more the cheaper, but are they of any use?

greetings 
thomas e
_____________________________________________________________________
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
http://smartsurfer.web.de/?mc=100071&distributionid=000000000066



From xask.linus at gmail.com  Mon May 26 16:18:31 2008
From: xask.linus at gmail.com (Deepak Mishra)
Date: Mon, 26 May 2008 20:48:31 +0530
Subject: [Ronja] Replacement for SMD Coils ?
Message-ID: <3722a3330805260818k4091d700nb4aa61d02da3e8be@mail.gmail.com>

Hi ,
I am having trouble sourcing SMD coils required in the Twister 2 BoM in
India

COILSMD 6.5mm square33uH/0.32A/0.25Ohm1350592 1.61 965-039 6.5 COILSMD 7.6mm
square100uH/0.32A/0.6Ohm1350193 2.69 965-042 7.5

I visited some shops in Kolkata but could not find it , they it can be
extremly difficult to find.

Can there be a replacement for these coils, or can they be some how made by
hand ?

Regards,
Deepak
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://pointless.net/pipermail/ronja/attachments/20080526/ea66de72/attachment.html 

From twibright at hispeed.ch  Mon May 26 18:37:27 2008
From: twibright at hispeed.ch (Karel Kulhavy)
Date: Mon, 26 May 2008 19:37:27 +0200
Subject: [Ronja] Replacement for SMD Coils ?
Message-ID: <21942493.1211823478939.JavaMail.root@viefep18>

---- Deepak Mishra <xask.linus at gmail.com> schrieb:
> Hi ,
> I am having trouble sourcing SMD coils required in the Twister 2 BoM in
> India
> 
> COILSMD 6.5mm square33uH/0.32A/0.25Ohm1350592 1.61 965-039 6.5 COILSMD 7.6mm
> square100uH/0.32A/0.6Ohm1350193 2.69 965-042 7.5
> 
> I visited some shops in Kolkata but could not find it , they it can be
> extremly difficult to find.

Did you try to search for the exact type or did you also search for a generic coil
with the given parameters?

CL<
> 
> Can there be a replacement for these coils, or can they be some how made by
> hand ?
> 
> Regards,
> Deepak



From xask.linus at gmail.com  Tue May 27 20:18:19 2008
From: xask.linus at gmail.com (Deepak Mishra)
Date: Wed, 28 May 2008 00:48:19 +0530
Subject: [Ronja] Home made twister PCB
Message-ID: <3722a3330805271218t42fee63bxbdfdb950c5a9c144@mail.gmail.com>

Hi ,
I am trying to make the Twister 1 Ronja,
for making the PCB i will try the "Toner Transfer Method" using which I can
make it at home, easily and cheaply
Here's a reference -
http://in.youtube.com/watch?v=urv6jArKp6M&NR=1

Has anyone tried this before ?
Any comments ?

Regards,
Deepak
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://pointless.net/pipermail/ronja/attachments/20080528/14957b4d/attachment.html 

From twibright at hispeed.ch  Tue May 27 21:40:28 2008
From: twibright at hispeed.ch (Karel Kulhavy)
Date: Tue, 27 May 2008 22:40:28 +0200
Subject: [Ronja] Home made twister PCB
Message-ID: <32013173.1211920828199.JavaMail.root@viefep15>

---- Deepak Mishra <xask.linus at gmail.com> schrieb:
> Hi ,
> I am trying to make the Twister 1 Ronja,
> for making the PCB i will try the "Toner Transfer Method" using which I can
> make it at home, easily and cheaply
> Here's a reference -
> http://in.youtube.com/watch?v=urv6jArKp6M&NR=1

I wouldn't recommend it. I would recommend factory made if possible.

CL<



From bms at incunabulum.net  Wed May 28 05:47:12 2008
From: bms at incunabulum.net (Bruce M Simpson)
Date: Wed, 28 May 2008 05:47:12 +0100
Subject: [Ronja] Replacement for SMD Coils ?
In-Reply-To: <3722a3330805260818k4091d700nb4aa61d02da3e8be@mail.gmail.com>
References: <3722a3330805260818k4091d700nb4aa61d02da3e8be@mail.gmail.com>
Message-ID: <483CE3D0.1080306@incunabulum.net>

Deepak Mishra wrote:
> Hi ,
> I am having trouble sourcing SMD coils required in the Twister 2 BoM 
> in India
>
> COIL 	SMD 6.5mm square 	33uH/0.32A/0.25Ohm 	1 	350592 	1.61 	965-039 	6.5
> COIL 	SMD 7.6mm square 	100uH/0.32A/0.6Ohm 	1 	350193 	2.69 	965-042 	7.5
>
>

I managed to get these from Rapid Online in Colchester, UK. They were a 
little tricky to mount by hand rather than reflow -- there was not much 
sideways clearance.

I can't remember exactly which case number I bought. In the end I got 
one Twister2's DC-DC converter working OK with these coils.

cheers
BMS


From twibright at hispeed.ch  Wed May 28 08:12:36 2008
From: twibright at hispeed.ch (Karel Kulhavy)
Date: Wed, 28 May 2008 9:12:36 +0200
Subject: [Ronja] Home made twister PCB
Message-ID: <18924680.1211958757025.JavaMail.root@viefep17>

---- Deepak Mishra <xask.linus at gmail.com> schrieb:
> Hi all,
> Another question :
> Does the twister PCB have circuit on both sides ?

Yes as you can see at http://ronja.twibright.com/twister/pcb.php

> I mean it is only possible for me to etch a circuit only on one side of the
> board.

No.

CL<
> So if the circuit is only on one side of board and the other side is the
> just a "documentation layer" for easy soldering , only then can i use the
> home made PCB technique.
> 
> Regards,
> Deepak



From bms at incunabulum.net  Wed May 28 15:43:18 2008
From: bms at incunabulum.net (Bruce M Simpson)
Date: Wed, 28 May 2008 15:43:18 +0100
Subject: [Ronja] Home made twister PCB
In-Reply-To: <3722a3330805271218t42fee63bxbdfdb950c5a9c144@mail.gmail.com>
References: <3722a3330805271218t42fee63bxbdfdb950c5a9c144@mail.gmail.com>
Message-ID: <483D6F86.5000808@incunabulum.net>

Deepak Mishra wrote:
> Hi ,
> I am trying to make the Twister 1 Ronja,
> for making the PCB i will try the "Toner Transfer Method" using which 
> I can make it at home, easily and cheaply
> Here's a reference -
> http://in.youtube.com/watch?v=urv6jArKp6M&NR=1 
> <http://in.youtube.com/watch?v=urv6jArKp6M&NR=1>
>
> Has anyone tried this before ?

I've produced double-sided Ronja receiver boards using toner transfer 
OK, although they are tricky to reflow solder and it's easy to end up 
with shorts.

You can solder them by hand but it takes ages. I did one using toaster 
oven reflow, the trouble is getting it right. You really need something 
with the gauge of a hypodermic needle to apply the solder paste...

I wouldn't recommend toner transfer for the Twisters. You can get away 
with it for the transmitters and receivers.


From bms at incunabulum.net  Wed May 28 15:48:13 2008
From: bms at incunabulum.net (Bruce M Simpson)
Date: Wed, 28 May 2008 15:48:13 +0100
Subject: [Ronja] Home made twister PCB
In-Reply-To: <3722a3330805271218t42fee63bxbdfdb950c5a9c144@mail.gmail.com>
References: <3722a3330805271218t42fee63bxbdfdb950c5a9c144@mail.gmail.com>
Message-ID: <483D70AD.1090904@incunabulum.net>

Deepak Mishra wrote:
>
> Any comments ?

P.S. I highly recommend getting hold of a hot roll laminator -- this 
will give you even heat and pressure which is key to making it work. 
They're cheap and easily available in .uk now, mine was second-hand for 
beer money.

I had best success with re-using scrap clay paper and an old laser 
printer I picked up from a recycling depot. Use the darkest setting. I 
did one side at a time, making sure to protect the lower layer once 
done, otherwise the toner will just flake off.


From xask.linus at gmail.com  Wed May 28 16:36:25 2008
From: xask.linus at gmail.com (Deepak Mishra)
Date: Wed, 28 May 2008 21:06:25 +0530
Subject: [Ronja] Home made twister PCB
In-Reply-To: <483D6F86.5000808@incunabulum.net>
References: <3722a3330805271218t42fee63bxbdfdb950c5a9c144@mail.gmail.com>
	<483D6F86.5000808@incunabulum.net>
Message-ID: <3722a3330805280836y12d1f86chb7e4cbe296a368c3@mail.gmail.com>

2008/5/28 Bruce M Simpson <bms at incunabulum.net>:

> Deepak Mishra wrote:
> > Hi ,
> > I am trying to make the Twister 1 Ronja,
> > for making the PCB i will try the "Toner Transfer Method" using which
> > I can make it at home, easily and cheaply
> > Here's a reference -
> > http://in.youtube.com/watch?v=urv6jArKp6M&NR=1
> > <http://in.youtube.com/watch?v=urv6jArKp6M&NR=1>
> >
> > Has anyone tried this before ?
>
> I've produced double-sided Ronja receiver boards using toner transfer
> OK, although they are tricky to reflow solder and it's easy to end up
> with shorts.
>
> You can solder them by hand but it takes ages. I did one using toaster
> oven reflow, the trouble is getting it right. You really need something
> with the gauge of a hypodermic needle to apply the solder paste...


I am making Twister 1,    so I dont have any SMD components, all my
components are DIL
DILs will be easy to solder by hand on toner transfered boards isn't it ?


>
> I wouldn't recommend toner transfer for the Twisters. You can get away
> with it for the transmitters and receivers.
>
> --
> Twibright Ronja mailing list http://ronja.twibright.com
> Ronja at lists.pointless.net
> http://pointless.net/mailman/listinfo/ronja
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://pointless.net/pipermail/ronja/attachments/20080528/4c272d20/attachment.html 

From bms at incunabulum.net  Thu May 29 04:02:13 2008
From: bms at incunabulum.net (Bruce M Simpson)
Date: Thu, 29 May 2008 04:02:13 +0100
Subject: [Ronja] Home made twister PCB
In-Reply-To: <3722a3330805280836y12d1f86chb7e4cbe296a368c3@mail.gmail.com>
References: <3722a3330805271218t42fee63bxbdfdb950c5a9c144@mail.gmail.com>	<483D6F86.5000808@incunabulum.net>
	<3722a3330805280836y12d1f86chb7e4cbe296a368c3@mail.gmail.com>
Message-ID: <483E1CB5.9040306@incunabulum.net>

Deepak Mishra wrote:
>
>
> I am making Twister 1,    so I dont have any SMD components, all my 
> components are DIL
> DILs will be easy to solder by hand on toner transfered boards isn't it ?

Provided you get good precision on the drilling, all through components 
-- sure, can do -- but that's a lot of holes! I found that using 
laminate board was best, with an Archimedean hand drill (the kind you 
push up and down). Unless you have access to a decent drill press, but 
even then, accuracy is key.

Do yourself a favor, get boards made... is my suggestion.


From xask.linus at gmail.com  Fri May 30 12:24:54 2008
From: xask.linus at gmail.com (Deepak Mishra)
Date: Fri, 30 May 2008 16:54:54 +0530
Subject: [Ronja] Need the BPW43 & HPWT
Message-ID: <3722a3330805300424m72398c3dpf7d4dd5c3870d867@mail.gmail.com>

Hi !
I am having the hardest time sourcing the photodiode and the LED here in
India.
I need it urgently because this is my Btech project.

I can use a laser pointer instead of an LED.
But the BPW43 is not easily available here .
Can anyone point me as to where I can find it in India.

or even better could some one courier it to me ?

Cheers,
Deepak
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://pointless.net/pipermail/ronja/attachments/20080530/83c5693e/attachment.html 

From arunk at speedpost.net  Fri May 30 13:41:27 2008
From: arunk at speedpost.net (Arun Krishnan)
Date: Fri, 30 May 2008 18:11:27 +0530
Subject: [Ronja] Need the BPW43 & HPWT
In-Reply-To: <3722a3330805300424m72398c3dpf7d4dd5c3870d867@mail.gmail.com>
References: <3722a3330805300424m72398c3dpf7d4dd5c3870d867@mail.gmail.com>
Message-ID: <1212151287.19961.1255874411@webmail.messagingengine.com>

Hi Deepak,

You cannot find the HPWT in India. It is impossible.

BPW43 you can get from RSIndia.com

Regards,
Arun


----- Original message -----
From: "Deepak Mishra" <xask.linus at gmail.com>
To: "Twibright Ronja" <ronja at lists.pointless.net>
Date: Fri, 30 May 2008 16:54:54 +0530
Subject: [Ronja] Need the BPW43 & HPWT

Hi !
I am having the hardest time sourcing the photodiode and the LED here in
India.
I need it urgently because this is my Btech project.

I can use a laser pointer instead of an LED.
But the BPW43 is not easily available here .
Can anyone point me as to where I can find it in India.

or even better could some one courier it to me ?

Cheers,
Deepak


From arunk at speedpost.net  Fri May 30 13:44:17 2008
From: arunk at speedpost.net (Arun Krishnan)
Date: Fri, 30 May 2008 18:14:17 +0530
Subject: [Ronja] Need the BPW43 & HPWT
In-Reply-To: <3722a3330805300424m72398c3dpf7d4dd5c3870d867@mail.gmail.com>
References: <3722a3330805300424m72398c3dpf7d4dd5c3870d867@mail.gmail.com>
Message-ID: <1212151457.20521.1255875107@webmail.messagingengine.com>

Hi again,

Just noticed that RS has added the low power versions of the HPWTs to
their catalog. If you wish to just demonstrate your project on a bench,
then these would be sufficient.

Regards,
Arun


----- Original message -----
From: "Deepak Mishra" <xask.linus at gmail.com>
To: "Twibright Ronja" <ronja at lists.pointless.net>
Date: Fri, 30 May 2008 16:54:54 +0530
Subject: [Ronja] Need the BPW43 & HPWT

Hi !
I am having the hardest time sourcing the photodiode and the LED here in
India.
I need it urgently because this is my Btech project.

I can use a laser pointer instead of an LED.
But the BPW43 is not easily available here .
Can anyone point me as to where I can find it in India.

or even better could some one courier it to me ?

Cheers,
Deepak


From twibright at hispeed.ch  Fri May 30 14:01:22 2008
From: twibright at hispeed.ch (Karel Kulhavy)
Date: Fri, 30 May 2008 15:01:22 +0200
Subject: [Ronja] Home made twister PCB
Message-ID: <24837399.1212152483670.JavaMail.root@viefep17>

---- Bruce M Simpson <bms at incunabulum.net> schrieb:
> Deepak Mishra wrote:
> >
> >
> > I am making Twister 1,    so I dont have any SMD components, all my 
> > components are DIL
> > DILs will be easy to solder by hand on toner transfered boards isn't it ?
> 
> Provided you get good precision on the drilling, all through components 
> -- sure, can do -- but that's a lot of holes! I found that using 
> laminate board was best, with an Archimedean hand drill (the kind you 
> push up and down). Unless you have access to a decent drill press, but 
> even then, accuracy is key.
> 
> Do yourself a favor, get boards made... is my suggestion.

ronjashop.com now has twister2's, someone asked me on the IRC.

CL<



From twibright at hispeed.ch  Fri May 30 14:04:38 2008
From: twibright at hispeed.ch (Karel Kulhavy)
Date: Fri, 30 May 2008 15:04:38 +0200
Subject: [Ronja] Need the BPW43 & HPWT
Message-ID: <26549375.1212152678467.JavaMail.root@viefep17>

---- Arun Krishnan <arunk at speedpost.net> schrieb:
> Hi again,
> 
> Just noticed that RS has added the low power versions of the HPWTs to
> their catalog. If you wish to just demonstrate your project on a bench,
> then these would be sufficient.

Low power version of the HPWT is like a low power version of Lamborghini Diablo. What good for? For doing the groceries? ;-)

CL<
> 
> Regards,
> Arun
> 
> 
> ----- Original message -----
> From: "Deepak Mishra" <xask.linus at gmail.com>
> To: "Twibright Ronja" <ronja at lists.pointless.net>
> Date: Fri, 30 May 2008 16:54:54 +0530
> Subject: [Ronja] Need the BPW43 & HPWT
> 
> Hi !
> I am having the hardest time sourcing the photodiode and the LED here in
> India.
> I need it urgently because this is my Btech project.
> 
> I can use a laser pointer instead of an LED.
> But the BPW43 is not easily available here .
> Can anyone point me as to where I can find it in India.
> 
> or even better could some one courier it to me ?
> 
> Cheers,
> Deepak
> 
> -- 
> Twibright Ronja mailing list http://ronja.twibright.com
> Ronja at lists.pointless.net
> http://pointless.net/mailman/listinfo/ronja



From xask.linus at gmail.com  Fri May 30 17:03:27 2008
From: xask.linus at gmail.com (Deepak Mishra)
Date: Fri, 30 May 2008 21:33:27 +0530
Subject: [Ronja] Need the BPW43 & HPWT
In-Reply-To: <1212151287.19961.1255874411@webmail.messagingengine.com>
References: <3722a3330805300424m72398c3dpf7d4dd5c3870d867@mail.gmail.com>
	<1212151287.19961.1255874411@webmail.messagingengine.com>
Message-ID: <3722a3330805300903x4fbc66c1t3427d0e33a1f870f@mail.gmail.com>

2008/5/30 Arun Krishnan <arunk at speedpost.net>:

> Hi Deepak,
>
> You cannot find the HPWT in India. It is impossible.


"Silicon Components" <http://siliconcomponents.net/>  ran an advertisment in
Electronics For You (March 2008) showing High Watt Luxeon LumiLeds, they
might be able to provide the HPWT or atlest the Luxeon Star, Pramod on the
mailing list had made a driver circuit for the same, but they deal in bulk
quantities.

Anyways can you suggest an LED which could be used and is available in India
?

>
>
> BPW43 you can get from RSIndia.com
>
> Regards,
> Arun
>
>
> ----- Original message -----
> From: "Deepak Mishra" <xask.linus at gmail.com>
> To: "Twibright Ronja" <ronja at lists.pointless.net>
> Date: Fri, 30 May 2008 16:54:54 +0530
> Subject: [Ronja] Need the BPW43 & HPWT
>
> Hi !
> I am having the hardest time sourcing the photodiode and the LED here in
> India.
> I need it urgently because this is my Btech project.
>
> I can use a laser pointer instead of an LED.
> But the BPW43 is not easily available here .
> Can anyone point me as to where I can find it in India.
>
> or even better could some one courier it to me ?
>
> Cheers,
> Deepak
>
> --
> Twibright Ronja mailing list http://ronja.twibright.com
> Ronja at lists.pointless.net
> http://pointless.net/mailman/listinfo/ronja
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://pointless.net/pipermail/ronja/attachments/20080530/1a60cd74/attachment.html 

From bms at incunabulum.net  Sat May 31 02:11:19 2008
From: bms at incunabulum.net (Bruce M Simpson)
Date: Sat, 31 May 2008 02:11:19 +0100
Subject: [Ronja] Need the BPW43 & HPWT
In-Reply-To: <1212151457.20521.1255875107@webmail.messagingengine.com>
References: <3722a3330805300424m72398c3dpf7d4dd5c3870d867@mail.gmail.com>
	<1212151457.20521.1255875107@webmail.messagingengine.com>
Message-ID: <4840A5B7.3070607@incunabulum.net>

Arun Krishnan wrote:
> Hi again,
>
> Just noticed that RS has added the low power versions of the HPWTs to
> their catalog. If you wish to just demonstrate your project on a bench,
> then these would be sufficient.
>   

I have several tubes of the low power HPWTs gathering dust in my living 
room...


From xask.linus at gmail.com  Sat May 31 17:09:36 2008
From: xask.linus at gmail.com (Deepak Mishra)
Date: Sat, 31 May 2008 21:39:36 +0530
Subject: [Ronja] Need the BPW43 & HPWT
In-Reply-To: <4840A5B7.3070607@incunabulum.net>
References: <3722a3330805300424m72398c3dpf7d4dd5c3870d867@mail.gmail.com>
	<1212151457.20521.1255875107@webmail.messagingengine.com>
	<4840A5B7.3070607@incunabulum.net>
Message-ID: <3722a3330805310909s5ed844btaa24e28732416623@mail.gmail.com>

Hi Arun,
do you also have extra BPW43 ? it would b e very nice if had some .

2008/5/31 Bruce M Simpson <bms at incunabulum.net>:

> Arun Krishnan wrote:
> > Hi again,
> >
> > Just noticed that RS has added the low power versions of the HPWTs to
> > their catalog. If you wish to just demonstrate your project on a bench,
> > then these would be sufficient.
> >
>
> I have several tubes of the low power HPWTs gathering dust in my living
> room...
>
> --
> Twibright Ronja mailing list http://ronja.twibright.com
> Ronja at lists.pointless.net
> http://pointless.net/mailman/listinfo/ronja
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://pointless.net/pipermail/ronja/attachments/20080531/ec2995b0/attachment.html 

From arunk at speedpost.net  Sat May 31 21:05:21 2008
From: arunk at speedpost.net (Arun Krishnan)
Date: Sun, 01 Jun 2008 01:35:21 +0530
Subject: [Ronja] Need the BPW43 & HPWT
In-Reply-To: <3722a3330805310909s5ed844btaa24e28732416623@mail.gmail.com>
References: <3722a3330805300424m72398c3dpf7d4dd5c3870d867@mail.gmail.com>
	<1212151457.20521.1255875107@webmail.messagingengine.com>
	<4840A5B7.3070607@incunabulum.net>
	<3722a3330805310909s5ed844btaa24e28732416623@mail.gmail.com>
Message-ID: <1212264321.16431.1256060977@webmail.messagingengine.com>

Hi Deepak,

It wasn't me who has tubes of HPWTs sitting in his basement. I also
don't have BPW43s. I bought only two and used them in my construction,
sorry :(

Try RS. It's a bit expensive, but they work.

Regards,
Arun


----- Original message -----
From: "Deepak Mishra" <xask.linus at gmail.com>
To: "Twibright Ronja" <ronja at lists.pointless.net>
Date: Sat, 31 May 2008 21:39:36 +0530
Subject: Re: [Ronja] Need the BPW43 & HPWT

Hi Arun,
do you also have extra BPW43 ? it would b e very nice if had some .

2008/5/31 Bruce M Simpson <bms at incunabulum.net>:

> Arun Krishnan wrote:
> > Hi again,
> >
> > Just noticed that RS has added the low power versions of the HPWTs to
> > their catalog. If you wish to just demonstrate your project on a bench,
> > then these would be sufficient.
> >
>
> I have several tubes of the low power HPWTs gathering dust in my living
> room...
>
> --
> Twibright Ronja mailing list http://ronja.twibright.com
> Ronja at lists.pointless.net
> http://pointless.net/mailman/listinfo/ronja
>