[Ronja] Problem with RONJA

[Daniel Schneider]

Yes I did the whole layout of  Twister, Receiver and Transmitter onto 
PCBs and used SOIC and 0603 packages. My power supply is not over the 
coax cable, because I will do it over PowerOverEthernet. Right now I 
just use two laboratory power supply with 5V and 12 V. The connection 
between the Twister and the RX, TX  is only 30cm long coax and for the 
power supply I use ribbon cable. For testing I use the TLWR 7600. I can 
send you in the next days pictures.

Daniel

Karel Kulhavy schrieb:
> ---- Daniel Schneider <Schneider2000 at web.de> schrieb:
>   
>> Hi,
>>
>> I bulit the whole RONJA and during idle mode everything is allright. When I do the paketloss test or only the permanent 10Mhz with one Twister, one RX and one TX the data does not go through. If I disconect the receiver I can follow the data with an ocilloscope to the output of the receiver. If I plug it in again only the RX and the TX indication LEDs are flashing fast.
>> Is there anyone who had problems like these or anyone who can help me???
>> Thanx a lot in advance!
>>     
>
> Did you do anything different from the instructions? Do you have pictures?
>
> CL<
>   
>> Daniel
>>
>> _______________________________________________________________________
>> Jetzt neu! Schützen Sie Ihren PC mit McAfee und WEB.DE. 30 Tage
>> kostenlos testen. http://www.pc-sicherheit.web.de/startseite/?mc=022220
>>
>>
>> -- 
>> Twibright Ronja mailing list http://ronja.twibright.com
>> Ronja at lists.pointless.net
>> http://pointless.net/mailman/listinfo/ronja
>>     
>
>
>