[Ronja] electronics newbie question

[Deepak Mishra]

Thanks a lot !

On 15/03/2008, Karel Kulhavy <twibright at hispeed.ch> wrote:
>
> ---- "Gyurkó Martin" <asteri_x at freemail.hu> schrieb:
>
> > Through hole pins:
> DIP = Dual in line through hole pins
> DIL = DIP
>
> SMD devices are all the other:
> SOIC = A Small-Outline Integrated Circuit
> TSSOP = Thin-Shrink Small Outline Package
> BGA = Ball grid array
>
>
>
> DIL/DIP means the wires are stuck into holes in a board. SMD means the
> device is just
> laid down on the board without any holes and soldered directly to the
> traces.
>
> CL<
>
> bye,
> Martin
>
>
> Karel Kulhavy írta:
>
> > ---- Deepak Mishra <xask.linus at gmail.com> schrieb:
> >> Hi,
> >>
> >> While checking for the availability of the RONJA components, I got
> confused
> >> a bit
> >> I was looking for the 74xxxx,
> >>
> >> the packaging mentioned "DIP", "SOIC"    but NOT "SMD" as in the RONJA
> part
> >> list.
> >>
> >> IS SOIC the same as SMD. They seem like the same thing
> >>
> >> can I use the SOIC packaged ICs on the PCB listed at the website.
> >
> > Yes. I should change it in the partlists.
> >
> > CL<
> >> Regards,
> >> Deepak
> >
> >
>
>
> --
> Twibright Ronja mailing list http://ronja.twibright.com
> Ronja at lists.pointless.net
> http://pointless.net/mailman/listinfo/ronja
>
>
>
> --
> Twibright Ronja mailing list http://ronja.twibright.com
> Ronja at lists.pointless.net
> http://pointless.net/mailman/listinfo/ronja
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://pointless.net/pipermail/ronja/attachments/20080315/4d4108f5/attachment.html