[Ronja] Ronja documentation

[twibright at hispeed.ch]

>Hi, I have now studied almost everything needed to build a ronja
>inferno. But I think I have now more questions than before :)
>
>I am very interested in the project but it's hard to find technical
>information and specifications about the individual modules. I like it

The individual modules are not technically specified. Only the models
- Metropolis, Inferno etc. The modules
are not meant to be used by the user
separately, always as a part of model.
A user therefore doesn't need to
know a technical specification.

>very small and because you use a lot of standard parts like some of
>the 74series ic's, I prefer to reimplement some of the modules in a
>smaller package probably in a fpga or microcontroller design.

To do this competently you need to be
good in electric engineering because there is a lot of related issues which
if neglected the device can easily become unreliable. But if you are versed in electric engineering it shouldn't be
difficult to see from the schematics how
it's supposed to work.

>
>What I need is,
>
>1. How is the signal processed from the RJ45 interface

This is explained in FAQ -> How Ronja Works -> How Twister2 Works

>2. What has to be done to create the ronja signal that leaves the final LED

This signal is created by the Twister2.

CL<