[Ronja] Ronja documentation

[Arun Krishnan]

Hi Kevin,

Check the Ronja WIKI/UserContributions page. There's a project called
SPIDER that's listed there that does exactly what you want. It's TWISTER
in CPLD. It has some problems in it's current form, but workable with a
few modifications. HDL code is provided.

Regards,
Arun


----- Original message -----
From: "Kevin Bortis" <wermut at gmail.com>
To: ronja at lists.pointless.net
Date: Tue, 22 Jan 2008 07:24:15 +0100
Subject: [Ronja] Ronja documentation

Hi, I have now studied almost everything needed to build a ronja
inferno. But I think I have now more questions than before :)

I am very interested in the project but it's hard to find technical
information and specifications about the individual modules. I like it
very small and because you use a lot of standard parts like some of
the 74series ic's, I prefer to reimplement some of the modules in a
smaller package probably in a fpga or microcontroller design.

What I need is,

1. How is the signal processed from the RJ45 interface
2. What has to be done to create the ronja signal that leaves the final
LED

I would appreciate if someone could point me to some information.

Regards

kab

-- 
Twibright Ronja mailing list http://ronja.twibright.com
Ronja at lists.pointless.net
http://pointless.net/mailman/listinfo/ronja