[Ronja] Chyba v twisteru - blika power led

[Karel Kulhavy]

On Sun, Feb 25, 2007 at 11:06:45AM +0100, Ing. Drahoslav Volejníček wrote:
> I don't know what you exactly mean. I went through
> http://ronja.twibright.com/twister/building.php step by step. I didn't see
> any "correctness check". I also followed the instructions on

There it is between Cleaning and (Optional) jumpers:

Correctness check Take the PCB and inspect it completely for: * Left-out
components (except C54, C55, C113, and C114) * Correct values * Correct IC
types * Correct orientation of IC's * Correct orientation of diodes. * Correct
orientation of polarized capacitors * Correct orientation of connector keys *
Joints soldered wrong or not at all Printing this partlist and another copy of
assembly plan (left) will help for scratching out.

It happens quite often that some part is incorrectly populated.

CL<
> http://ronja.twibright.com/twister/testing.php, but there is only very
> sipmle sanity check. Write here exact url if you can pls.
> 
> Thx!
> 
> Drahos
> 
> -----Original Message-----
> From: Karel Kulhavy
> Sent: Sunday, February 25, 2007 10:43 AM
> 
> Did you do the correctness check in the building instructions? That usually
> reveals all errors like this at once.
> 
> CL<
> 
> 
> -- 
> Twibright Ronja mailing list http://ronja.twibright.com
> Ronja at lists.pointless.net
> http://pointless.net/mailman/listinfo/ronja