[Ronja] Chyba v twisteru - blika power led

[Kuba]

@ http://ronja.twibright.com/twister/building.php >> Ctrl + F >> ... type 
"correctness check" (without " ")

Correctness check
Take the PCB and inspect it completely for:
  a.. Left-out components (except C54, C55, C113, and C114)
  b.. Correct values
  c.. Correct IC types
  d.. Correct orientation of IC's
  e.. Correct orientation of diodes.
  f.. Correct orientation of polarized capacitors
  g.. Correct orientation of connector keys
  h.. Joints soldered wrong or not at all

----- Original Message ----- 
From: "Ing. Drahoslav Volejnícek" <volejnicek at alcom-sro.cz>
To: "'Twibright Ronja'" <ronja at lists.pointless.net>
Sent: Sunday, February 25, 2007 11:06 AM
Subject: Re: [Ronja] Chyba v twisteru - blika power led


>I don't know what you exactly mean. I went through
> http://ronja.twibright.com/twister/building.php step by step. I didn't see
> any "correctness check". I also followed the instructions on
> http://ronja.twibright.com/twister/testing.php, but there is only very
> sipmle sanity check. Write here exact url if you can pls.
>
> Thx!
>
> Drahos
>
> -----Original Message-----
> From: Karel Kulhavy
> Sent: Sunday, February 25, 2007 10:43 AM
>
> Did you do the correctness check in the building instructions? That 
> usually
> reveals all errors like this at once.
>
> CL<
>
>
> -- 
> Twibright Ronja mailing list http://ronja.twibright.com
> Ronja at lists.pointless.net
> http://pointless.net/mailman/listinfo/ronja