[Ronja] welded ronja prototype, new link

Jirka Bohac jbohac at jikos.cz
Thu May 11 00:00:22 BST 2006


Hi all,

after a long time of very passive building, we finished another Ronja
link. It links the "Bakulak" and "AVP Spojka" nodes in Prague's
CZFree.Net

It uses standard Twister + airwire RX/TX electronics and very
non-standard mechanics. It's made of thick metal pipes and welding and
lathing were used in the process.

I put comments and pictures of the mechanics at
http://www.jikos.cz/~jbohac/welded_ronja/
in hope that someone may find them useful.

Clock: feel free to use any of the pictures in the gallery. Eventually,
I'll make some pictures from the installation on the other side as
well...

# ping -fq -s 1400 10.15.129.6
PING 10.15.129.6 (10.15.129.6) 1400(1428) bytes of data.
--- 10.15.129.6 ping statistics ---
22033583 packets transmitted, 22033500 received, 0% packet loss, time 63967918ms
rtt min/avg/max/mdev = 0.000/2.796/42.304/0.375 ms, pipe 4, ipg/ewma 2.903/2.890 ms

;-)))


Regards,

Jirka



More information about the Ronja mailing list